WARNING
Always adjust the display brightness and position with the vehicle
stopped:
Adjusting the display brightness and position while driving the vehicle is
dangerous as doing
so could distract your attention from the road ahead and lead to an accident.
CAUTION
- Do not place beverages near the active driving display. If water or
other liquids are splashed
on the active driving display, it could cause damage.
- Do not place objects above the active driving display or apply
stickers to the dust-proof
sheet/optical receiver as they will cause interference.
- A sensor is integrated to control the display's luminosity. If the
optical receiver is covered,
the display's luminosity will lower making the display difficult to view.
- Do not allow intense light to hit the optical receiver. Otherwise, it
could cause damage.
NOTE
- Wearing polarized sunglasses will reduce the visibility of the active
driving display due to
the characteristics of the display.
- If the battery has been removed and re-installed or the battery
voltage is low, the adjusted
position may deviate.
- The display may be difficult to view or temporarily affected by
weather conditions such as
rain, snow, light, and temperature.
- If the audio system is removed, the active driving display cannot be
operated.
The active driving display indicates the following information:
- Blind Spot Monitoring (BSM) Operation Conditions and Warnings
- Distance Recognition Support System (DRSS) Operation Conditions and
Warnings
- Traffic Sign Recognition System (TSR) traffic signs and Warnings
- Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function)
Operation Conditions and Warnings
- Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS)
Operation
Conditions and Warnings
- Advanced Smart City Brake Support (Advanced SCBS) Warnings
- Smart City Brake Support (SCBS) Warnings
- Smart Brake Support (SBS) Warnings
- Cruise Control Operation Conditions
- Navigation Guidance (vehicles with navigation system)
- Speed limit indicator (vehicles with navigation system)
- Vehicle Speed
Each setting/adjustment for the active driving display can be performed on
the center
display.
1. Select the  icon on the home
screen and display the Settings screen.
2. Select the AD-Disp tab.
3. Select the desired item and perform the setting/adjustment.
-
Method for adjusting screen brightness
(automatically/manually)
-
Screen brightness initial settings (automatic adjustment is
selected)
-
Screen brightness adjustment (manual adjustment is selected)
-
Display position of active driving display (display height)
-
Active driving display angle adjustment (display angle
correction)
-
Active driving display ON/OFF (indication)
-
Navigation guidance ON/OFF
-
Reset settings (reset)
NOTE
- The desired driving position (display position, brightness level,
display information) can
be called up after programming the position.
|
